Until recently, many organizations didn't have to think about their data center infrastructure more than once a decade. As long as there was enough space to house the new server rack, cooling and power needs would work themselves out. But those times are quickly passing as the demand for computing power increases and puts a strain on electricity supplies. According to market research firm IDC (a sister company to CIO), computer support infrastructure needed to house and run servers is second only to system price among the concerns of data center managers. Steve Conway, a research vice president for high-performance computing at IDC, says, "These issues were at the number-12 position just three to four years ago, which means they were a non-issue." This change in priority reflects shifts in technology and a sharp growth in demand for processing power.
““To cut costs, get the right power conditioning solution and ensure that there are no cooling leaks.””
Virtualization and multicore processors are allowing us to put dramatically more power in a smaller footprint. Meanwhile, Gartner predicts that by next year, half the world's data centers will not have the infrastructure needed to meet the power and cooling requirements of the latest high-density equipment. These changes bring to managers of mainstream data centers issues that managers like myself in high-end scientific and technical supercomputing centers have been dealing with for decades: how to properly site infrastructure support equipment, optimize cooling for high server rack densities, balance data center efficiency against business needs and track all the little details that can make or break an implementation. The data center in which I work, a Department of Defense supercomputing center located at the Army Engineer Research and Development Center (ERDC), is in the middle of a two-year effort to totally overhaul its data center support infrastructure. Designing a new data center or retrofitting an old one is a complex process, but the six ideas below - road tested by our experiences during the past decade and informed by ERDC's ongoing infrastructure modernization - will get you started in the right direction.
1. Decide Whether you Really Need Your Own
Data Center. Growing your computing infrastructure is challenging. Before you commit to your next upgrade, ask yourself, 'Do I even need my own data center?'
A minimally robust infrastructure is going to include power-switching equipment and generators. But almost no one stops there. You have to protect yourself from fire and natural disasters. And once the data center is built, you're going to have to field a crew to monitor and maintain it. As Amazon CTO Werner Vogels said at the recent Next Generation Data Center conference, unless you're in an industry where having a highly efficient, in-house data center translates directly into revenue, you might be better off running your applications in someone else's data center. This solution isn't right for everyone, but as utility costs rise and growing demand squeezes the support infrastructure even tighter, it's worth considering.
. Weigh the Costs and Benefits of Green Design
2. Weigh the Costs and Benefits of Green Design
Rising costs and consumption rates are driving electricity concerns to the front of IT planning conversations. Items like transformers, electrical wiring, cooling and UPS can have large, fixed electrical losses, taking a slice off your available power before it gets to the first server. The Green Grid, a consortium of information technology companies interested in improving data center energy efficiency, recommends right-sizing your infrastructure by eliminating redundant components, installing only the equipment you need to make your data center run today. According to the group's Guidelines for Energy-Efficient Data Centers, right-sizing the infrastructure can save as much as 50 percent of the electric bill. But there is another wrinkle to the energy story that's only just started to work its way into data center planning: our national utility infrastructure is starting to show signs of wear.
The bridge collapse in Minneapolis and massive power outages in the early years of this decade are symptoms of a rapidly declining national critical infrastructure. Events like the outage on Aug. 14, 2003, which left 50 million people around the Great Lakes without power, are expected to become more common over the next several years unless significant steps are taken to rein in demand and increase the capacity and reliability of our aging power grid. With utility power disruption likely to become more frequent in the near term, data center managers should be motivated to design their infrastructure with power availability in mind, including redundant power distribution and generation systems to protect against system failure in the face of commercial power interruptions. Clearly, you need to design your infrastructure to be as efficient as possible (even taking steps like specifying high-efficiency power supplies in servers). But the degree to which you can green your power distribution infrastructure will depend upon the value of continuous availability to your organization and the costs of expanding capacity. For example, our supercomputing mission at the ERDC requires very robust availability of our computers.
Our electrical distribution infrastructure features redundant switches, batteries and electrical generators. These enable us to perform routine maintenance without exposing operations to an interruption, as well as to continue emergency operations over long periods during which a failure in one of these components might be expected. This increases our fixed electrical losses, but is unavoidable given our operational requirements.
3. Improve Flexibility by Designing for Closely Coupled Cooling
About 30 percent of the power that goes into the data center is turned into heat inside servers. The traditional approach to cooling puts large chillers outside the facility to cool water, which is then pumped to computer room air-conditioning (CRAC) units on machine room floors. This approach essentially floods the entire room with cold air and offers very little flexibility for targeting specific hot spots.
The concept of 'closely coupled cooling' has moved in and out of fashion over the years in supercomputing centers; we have found it to be efficient and effective. The idea is to put cooling very near the source of the heat it is meant to remove.
4. Think About the Floor Tiles
This approach allows for targeted cooling and control of hot spots, and can result in shorter air paths that require less fan power to move the cold air around the room.
Closely coupled cooling can allow for rack densities of up to four times the density of a typical room-oriented cooling solution. As customer demand pushes rack densities up, all the major server vendors are now offering closely coupled configurations.
There are many rack and chip-based closely coupled cooling solutions. For example, there are designs that install cooling in a rack form factor alongside server racks, or place it at the top of each rack for a 'top to bottom' approach. There are also solutions that deliver chilled water directly to the rear door of racks, or interleave coolers in drawers inside racks alternating with drawers of computers. Chip-based cooling solutions come in two basic varieties. The simplest deliver cool water to one or more radiators located over heat sources in your server. More complex systems use inert liquid that is directly applied to server chips in a closed loop system.
The ERDC supercomputing center was using chiplevel vaporization heat exchange in some of its Cray supercomputers last year. All of these options require plumbing for chilled water right to the computer racks, and you need to plan for this as you are designing your data center plumbing. If the thought of moving water into the heart of your data center causes your heart to skip a beat, fear not: there is a large body of engineering knowledge about how to minimize the risks. You'll want to take steps like keeping your water pipes as low as possible under your raised floor, installing leak detectors, providing leak-containment features like gravity drains and drip pans.
4. Think About the Floor Tiles
It's the Little Stuff that Matters. If you are not planning or cannot plan for closely coupled cooling, there are still steps you can take to improve the efficiency of your cooling. Plan to minimize the profile of cables and pipes you put under the raised floor in your machine room. This is the space that your CRAC units are using to push cold air toward your computers, and the effectiveness of energy used in cooling can be greatly increased if you can minimize the interruptions that air encounters. Minimizing underfloor obstructions can also help eliminate data center hot spots and prevent air handlers from working against one another. Another step you can take is to commission a fluid dynamics study of your data center or buy the software you need to perform that study yourself. This approach uses a computer model to simulate the flow of air around your data center and can help you identify the causes of and solutions to cooling problems, including the optimum placement of perforated floor tiles. The ERDC supercomputing center adopted this approach several years ago to make sure we were getting the most out of our cooling. Perforated tiles are often simply lined up in front of the racks on the cold aisle of servers in a data center. The fluid dynamics study showed that we needed to increase the diameter of perforations in some tiles, and concentrate additional courses of perforated tile in critical areas.
5. Move Support Equipment Outside
5. Move Support Equipment Outside
One of the most important steps you can take is to move as much of your power and cooling equipment as possible out of your data center. In fact, if you have the space, a good solution is to move the bulk of these items outside the building. When we needed a short-term fix to get 2 megawatts of additional power for a new supercomputer at ERDC, we found that we needed to add UPS and generator equipment that would not fit into the building that housed the rest of the electrical distribution infrastructure. This problem was compounded by the siting of the building 10 years ago between the foot of a steep hill and a road. The solution - to put the equipment outside in an area created by cutting into the hill - was expensive and added time delays to an already tight schedule. Our new longterm design places most of those components outside the building in modular units in a newly created utility field. "This move eliminates the constraints that building walls place on us when we need to increase our capacity and should give us the flexibility we need for at least another decade," says Greg Rottman, the engineer in charge of implementing the upgrade. The Green Grid found that as much as 25 percent of the electricity going into the data center is converted to heat in power distribution units, UPS equipment and switchgear.
6. Monitor for Power Management
Do you know how much power you are using? Are your servers pulling more or less electricity than the vendor specs say they should be? How close to your facility's power capacity will that next machine upgrade put you? An infrastructure monitoring system for the power and cooling systems needs to be part of any upgrade you are planning. Actively managing and monitoring your energy usage will help you plan for the future and assess the effectiveness of steps you take to improve your data center's efficiency. Convincing senior managers to fund data center improvements not directly related to business delivery can be a challenge. You may have to build your monitoring system piece by piece as you can afford it. But it makes sense to add your power monitoring to your data center before you undertake major changes designed to save energy and improve efficiency. This will allow you to establish a meaningful baseline from which to judge the effectiveness of your changes, and more effectively plan for the future.
